Electrical Wiring of the Multisensor Kit
Task 1. Wire the box
You’ll need:
- The assembled box from step 6
- Cable Assy R/A 2.1mm 6′ 24 AWG. PN: CP-2189-ND
- Cord 16AWG Nema 1-15P to CBL 4.92′. PN: 42-1009-ND
Steps:
- Insert the power cord through the Cable Gland as shown in Figure 6 and wire into the converter
- Wire the M8 Connector wires to the BeagleBone Black Assembly as shown in Figure 7
Figure 7 (wiring diagram)